2 Core FTTH NAP FTB IP30 Fiber Optic Termination Box
2Core FTTH NAP FTB Optica Roseta Wall Outlet Faceplate White IP30 Terminal Box SC Adapter Pigtail
The optical rosette acts as a termination point of the optical network, it use direct connectorization or fusion splice in a pre-connectorized pigtail. It can be installed on the wall, and adapt variety of optical connection styles LC/SC, maximum 2 cores.
Features
- It can be installed on any vertical flat surface or on a 4x2 ‘box embedded in wall;
- Compact dimension, light weight, special design
- Easy handling, no special tools needed;
- Identification Label behind the cover;
- The fiber optic reserve is inside the product;
- Allows accommodation of 40mm or 60mm fusion splice protectors;
- Capacity to store 20cm of optical cord with 3mm diameter;
- Complies with what is specified in the recommendations of the IEC 61755-1 standard;
- The lid is closed with a single screw in stainless steel and with a rotate cover to prevent dust.
- Five accesses for input and output of cables or optical cords (patch cords): 2 lower,1 top, 1 side and 1 access in the back cover;
Specification
| Model | FTB86P |
| Dimension (H*W*D) | 115*80*25mm |
| Max.Capacity | 2 core (single fiber) or mechanical splices |
| Cable type | Flat/ indoor round cable |
| Maximum input cable diameter | φ5.8mm |
| Outlet cable diameter | 2*1.6mm or2*3.0mm flat cable |
| Adapter | 2 SC |
| Color | white |
| Material | PC+ABS |
| Protection level | IP30 |
| impact protection | IK01 |
| Fiber type | single mode & multimode |
| Guarantee | 12 months |
| Standards | Degree of protection: IEC 60529; Temperature variation: IEC 61300-2-22; Telcordia GR-771. |
Application
FTTH internal environment
Product details
The NAP roseta have unuct port rubber seal for cable entry or exit, there are 2 SC couplers can be use, but without flange, shutter adapters can be used too. And there is logo print block and position for better OEM application, if you need please share AI, CDR, pdf, or jpg file, we will do the best for you.
There is cable ports at both sides and at back of the box, which ensure flexible fiber distribution and management. when use, please use tools to cut off the block, then can use.
At front of the box, there is cable entry or adapter output fix location; Fiber optic cable in and out at the same plane, the operation is more convenient and fast, each other does not affect each other, the structure is reasonable and clear;
The box with a screw lock to fix the cover and bottom, the stainless steel expansion screw is firm and reliable. It is covered with a specially customized dust cover, which has good protection, effectively avoids man-made damage.
Standard accessories
04 plastic tapes, 02 fixing screws, 02 screws for closing the cover.
Operation Instructions
Use adapters and connectors, to be acquired separately
Do the splice using the supplied splice protection sleeves with 40 mm long and diameter 3 mm (when contracted), this product must be acquired separately.
Product Tags:
|
|
2 Core FTTH NAP FTB IP30 Fiber Optic Termination Box Images
|
